What Outdoor Lighting Products Do We Use?

This is a question we get every now and then so I thought I would give a list of our most used products manufacturers. There are others that we use every now and then but these are my go-toos on most of our projects.

Our primary line is Kichler LED landscape lighting. There are many reasons I use this product, among them are loyalty, quality of product and their great warranty. When we first began our outdoor lighting business almost 10 years ago and I reached out to several professional lighting manufacturers, Kichler was the only one who paid attention and wanted to help us get going and they have been a strong supporter ever since. They also make a very good product at a reasonable price. Yes, there are other very good products out there but they are usually quite a bit more expensive and quite honestly, the Kichler products hold up very well in the central Texas environment so I don’t see any reason to use the higher cost products. They also stand behind their products with a full replacement warranty, not some repair or other nonsense. That makes it much easier on us and our client gets a new product if need be. Finally, they have been a strong supporter of the outdoor lighting industry by belonging to such organizations as the AOLP, ALA, ASLA, etc.

We also use CAST lighting for projects where we need a more robust cast brass fixture which will hold up to things like cattle! Yes, we do have some projects on central Texas ranch land where the fixture must be part light fixture, part tank and the CAST product fits that bill perfectly.

Our other fixture lines include Coppermoon, FX Luminaire, Universal and Auroralight among others but these listed are our most used products. All of these products are quite good and the manufacturers stand behind their products. They are also all members of the Association of Outdoor Lighting Professionals which demonstrates to us their commitment to the outdoor industry as a whole.

As for LED lamps we lean heavily on Kichler, Illumicare and Brilliance. These lines have been developed for the outdoor lighting industry and the manufacturers stand behind their products. There are a whole lot of LED lamps out there but very few that have been developed to be installed in both enclosed and exposed fixtures outdoors, in the harsh environment. The cheaper LED lamps that are found in the home improvement stores may be ok in some instances in doors but don’t try them in your landscape. The LED products used outside must be able to withstand all of the heat, rain, chemicals, cold, etc. that are found outside of walls of your home. These LED lamps do cost a lot more than those you see in the general marketplace but they will last and will end up costing a lot less over time, we promise.

As a rule, we first use products from AOLP members since we do believe strongly that any industry needs strong associations which can help their members become better at their craft. The AOLP is a not for profit national association which provides education to its members to insure they do quality work. They have a Standard for Installation which all contractors are supposed to follow and if they do follow those standards, the end user (customer) will have a great outdoor lighting system and a contractor who will be there to take care of it in the future.

We’re here to answer any other questions you may have about outdoor lighting products that we use or other products on the market. Just ask us at info@night-scenes.com.

Are You Satisfied?

Are the Rolling Stones partying in your head with that title?  If not, try this, … “I can’t get no satisfaction.”  How about now?

I like to say that we don’t want our clients to be satisfied, we want them to be happy.  To me the word satisfied means pleased, but not really HAPPY.  Satisfied to me means so-so; but happy brings a big smile to your face.

Some people do satisfactory work while others do great work.  We like to create great landscape lighting designs, and then install that outdoor lighting very well, not just satisfactorily.

  

It starts at the initial consultation where we don’t just halfway listen, but really pay attention.  Then it moves into the design phase where we try to not just, satisfactorily, put in lights; but instead approach the design to create some depth and interest throughout the property.  We don’t just specify satisfactory products; but very good products that will last for many years.  Then when our client is HAPPY with the design, we move into the installation. There we take the steps necessary to install the outdoor lighting as designed, and use quality infrastructure materials like wire and connectors to insure a great landscape lighting system which will perform as expected for years, making the client HAPPY.

There is also the service after the installation.  A satisfactory project might come with a one year service agreement or less.  Maybe just a one year warranty.  Of course, that’s satisfactory I suppose, but we include three full years of service and stand behind every aspect of that outdoor lighting system for that entire time.  Does that satisfy our client or does it make them HAPPY?  I’ll go with the happy on that.

So, we don’t guarantee satisfaction with our landscape lighting systems, we guarantee happiness.  We’ll leave satisfactory work to the other guys.

When you don’t want to settle for satisfied, let us know, we’ll make you happy.  info@night-scenes.com

LOW VOLTAGE VS. HIGH VOLTAGE LIGHTING

Why do we prefer to use low voltage lighting in our projects instead of high (line) voltage lighting? There are a lot of reasons, but let’s cover the big ones here.

Safety! 12 volt lighting is completely safe for man or beast (pet). No one can be electrocuted, pets can’t be shocked, and children can’t be harmed by low voltage lighting that is below 15 volts. There are companies out there that may use transformers that put out as much as 24 volts, but a low voltage lighting company working within the National Electrical Code will NOT use those transformers for landscape lighting because they are not listed for that use. UL 1838 (landscape lighting rated) transformers do not go above 15 volts and are perfectly safe.

With 120 or even 240 volt lighting, there is indeed a safety issue. We often find large high voltage fixtures very high in trees for a moon lighting effect. Although this may look pretty good, strong winds break limbs and those high voltage wires can cause some serious problems. High voltage fixtures require junction boxes (not needed for low voltage lighting) that get water in them from condensation or rain. It’s safe to say that high voltage and water do not play well with each other; whereas low voltage will not even short circuit in water. Here in central Texas, we have also found that, although the code requires all high voltage wires to be at least 18” deep, they rarely are more than 5-6” deep. This makes them easy to hit with your normal garden shovel, or your dog can easily dig them up and chew them causing a potential tragedy. Once again, this is not a problem with low voltage wiring.

Installation expense. Line voltage work must be done by a licensed electrician in all states. The wire must be at least 18” deep, which requires the use of a trenching machine. In some places, a permit may be required and inspections made. All of this adds up to higher expense. In Texas, there is no license needed to install low voltage lighting. Some states do require such licenses, however, but not many. The low voltage wire only needs to be placed 6” deep, which can be easily done by hand using a flat edged spade to avoid tearing up the lawn. No permits (in most parts of the country). These things mean less expense to pass onto the clients. In a future post I will go into the licensing issue because there are several good things about licensing that protect the consumer.

Fixture size. OK, everyone has seen those HUGE fixtures that have those great big high voltage light bulbs in them. The reason the fixture has to be so big is to hold that big light bulb! There is one place where I do think it’s ok to use these products and that is in a commercial setting where there is a lot of ambient lighting around. In these cases you need a LOT of light from some big ol’ fixtures! In a residential setting, or even a commercial setting where the surrounding light levels are low, there is no need for that much lumen output. Low voltage fixtures are much smaller and can be hidden in most cases. They produce plenty of light to handle any residential need.

Design Flexibility. Along with those great big line voltage fixtures, there is little flexibility for lumen output or beam spread in the light bulbs used in them. The primary choices for high voltage lamps are usually bright, brighter and brightest and then wide beam or very wide beam. Although a few new options have been developed, in 90% of the line voltage designs, the standard, less expensive choices are made. With low voltage there is a vast variety of lumen output and beam spreads available. There are also a larger selection of filters and lenses to create effects that are pleasing with the low voltage products. Additionally, many lighting fixtures are available to enhance the décor of the home in a very wide variety of styles.

Maintenance. Maintenance is much easier on a low voltage system than on a high voltage system. First of all, if something goes wrong with a line voltage system, you may have to call in an electrician to find the problem, although a well-trained lighting technician can usually troubleshoot basic problems and solve them. Occasionally, the problem may still require an electrician for the repair. In most states, anyone can work on a low voltage system and any issue with the system can be taken care of right away with no need to schedule another person to come in and make the repairs.

All-in-all the well designed and installed low voltage system has too many advantages to overlook and with some of today’s newest and most efficient LED products, there are considerably more advantages.

ISSUE	LOW VOLTAGE	HIGH (LINE) VOLTAGE
Safety	· No personal harm under 15v · Won’t short circuit in water · Wiring safe even if uncovered	· Electrocution hazard · Dangerous near water or rain · Must trench to 18” to be safe
Installation and Maintenance Expense	· No license required in TX; well-trained technician can install, troubleshoot and repair · Wire laid by hand; no lawn damage · No expensive permit needed in most places	· May need licensed electrician $ · Requires trenching machine to dig 18” deep ditches in yard $ · Permit may be required $
Design Flexibility	· Many options for lumen output and beam spread · Decorative options for added beauty	· Limited options
Fixture Size	· Small, easily hidden · Plenty of light output for residential and most commercial applications	· Large, bulky fixtures · May be appropriate for some commercial applications

We would be very happy to evaluate your lighting needs and develop a solution for you. Contact us today info@night-scenes.com