Security Lighting for the Commercial Property

My friends at CAST Lighting have posted a very good blog post about their 24 volt low voltage security lighting system.  This system is geared for commercial use more than residential use.  This is a case study from Pennsylvania State University.

One of the best things about this system is that it is completely portable!  Construction sites that may be around from a month to a few years can really benefit from this type of system which can be moved from one project to the next.

Take a read here http://www.cast-lighting.com/blog/2013/07/portable-led-perimeter-lighting-retrofit-for-construction-sites-cast-lighting-and-penn-state-case-study/ and leave me your thoughts.  I look forward to hearing from you soon.

Learning The Hard Way About LEDs

“Experience is the best teacher of all.” -Henry Callahan

Our company has been installing LED outdoor lighting systems since 2008. Our experience has taught us a lot over those years. Like which LED products are very good, and which products we should avoid like the plague.

The LED lighting industry has changed rapidly and dramatically in the last five years – mostly for the best. But along the way, we’ve bumped up against some bad products. It was bound to happen – the products were new and the marketing was usually very compelling. Sadly, in one instance for us, the marketing was a whole lot better than the lamps. In this particular case, we were purchasing LED lamps from a manufacturer who (we found out later) was getting lamps from a factory in China which simply was not doing a very good job. After installing about 900 of these lamps all over the great state of Texas, we had to go back to replace almost every single one of them. Naturally, the manufacturer was happy to replace them – initially with new lamps from the same factory. Eventually, we decided we just couldn’t accept this replacement offer, and required the company to buy back all the bad lamps. Finally, they started to carry a higher quality product developed specifically for the landscape lighting industry, and were able to exchange the bad lamps for new and much better replacements.

It was an expensive lesson for all of us. Although we got free replacement products, we still experienced some serious frustration, and had to pay our team’s labor costs for all of the replacements over a period of about three years. Amazingly enough, we still have a few of these lights out there, but we’re getting them all replaced as they go out.

The big lesson we learned was what to look for when it comes to an LED product that is going to be used in the outdoor environment. It’s important to understand that most LED products that are available to the general public are designed to be used indoors. They may not hold up very well in a sealed fixture, or in environments that have a lot of humidity, like a well-irrigated landscape. Of course, newer LED products – commercial or contract grade products -- that are designed to be used outside do cost more than the stuff you find at the local big box stores. But since they are made specifically for the purpose that they are being used for, they will last a lot longer, as they should.

We learned the hard way to avoid the hype, ask for samples, and test new products ourselves. We engage the manufacturer more directly and read a lot more reviews than we used to – so we don’t repeat a costly mistake. All of the products we use now have a proven reliability history. We have far more confidence in the products we install now than we did in the much earlier days of LED development.

No product is perfect every time; failures will still occur even among the best. Living with a less than 2% failure rate is something we feel pretty good about, and is easy for us to stand behind. That’s what our experience has taught us.

Our LED experience can help you to achieve your outdoor lighting desires with quality LED products.  Let us know if we can help you by dropping us a note at info@night-scenes.com

Shorter Days and Longer Nights. Welcome to Fall

Have you noticed that the days are getting shorter?

Every September we celebrate the official beginning of autumn, and we begin to lose about a minute of daylight every day. Although that doesn’t seem like very much, over the course of a month, it adds up to a half hour of lost daytime! Shortly after the equinox, (about 6 weeks now, being in November) in most of the country, we’ll also be setting our clocks back an hour for the end of daylight savings time and lose a whole hour in one day!

This brings a few things to my mind. First, here in central Texas our summer days are very hot and it’s just flat uncomfortable to be outside until very late at night -- and even then it’s not easy in the mid-summer months of July and August. So the cooler fall and winter evenings are much nicer to get outside and enjoy. And it won’t be long before it’s dark when we get home from work -- which means there may be challenges to moving around safely on your property. Finally, there are always some issues with timers that come up whenever there is a time change.

I actually like spending time outside in the fall and winter evenings, and it sure is wonderful when it’s not so dark and scary looking out across my yard. A little bit of soft lighting makes this time outside much more comfortable for everyone, even a big tough guy like me. There are creepy and menacing things skulking around out there in the darkness. Even if it’s just a skunk - I want to see it, so I need some lighting!

Also important is that we want to be able to navigate safely when the sun goes down. I notice that as I continue to age, my eyesight is not as good at night as it used to be; it takes longer for my eyes to adjust to the darkness. Arriving home after dark, or entertaining in the evening gives me pause to insure that my walkways are well lit reducing the chances for a fall and causing serious injury for myself or my guests.

Finally, there is the whole timer issue. It seems that many lighting companies will still install the old mechanical timers that must be constantly reset for changes in time -- which actually happens every single day. Starting on the first day of winter, the days begin to get longer (in the northern hemisphere) bit by bit, and the nights get shorter. Then the first day of summer is the longest day of the year, and each day after gets just a little shorter. So these mechanical timers will always need to be adjusted, or it results in lighting systems operating during daylight hours unnecessarily, or failing to come on until after dark. Both instances can be expensive, though in very different ways. We have never installed these type timers in our systems. Way back when we first started out, we used a digital timer with a battery back-up, along with a photo cell, to insure the lighting would not operate until it was dark enough; therefore, we only had to adjust the timer a couple of times a year. Now we have a truly great advancement: astronomical timers! WE LOVE THESE THINGS! We can program in your zip code (or longitude and latitude) and the timer automatically adjusts every single day. It even adjusts for daylight savings time! Now we simply change the battery once a year when we’re already on the property for the semi-annual spring or fall maintenance check, and the system is always working properly when needed.

We hope you will enjoy these more pleasant temperatures coming soon in the fall and winter. Please let us know how we can help you feel a little safer and more comfortable during those cooler but darker hours.

Solar Landscape Lighting? Now It’s Possible.

I am often asked if we would install solar lights. Although I’m thinking many different things at that moment (and unfortunately, very few of those thoughts are positive) I simply smile and say, “As of now, there is not a solar light available that is worth the money, or will do a very good job enhancing your landscape; so no, I do not install solar lights.”

However, let me say that I am definitely in favor of saving energy, and I think that solar is a great way of producing electricity. And I love the sun – who doesn’t love the sun?

But so far, every solar light fixture product I have seen is so sub-standard that I can’t risk my own reputation or integrity to stand behind them, to be quite honest. They use very cheap LED chips which give off an ugly blue hue. As color is such an important part of the desired design result, this is unacceptable. They also do not produce enough lumens to actually illuminate anything, including a walkway. The solar path lights seen in many neighborhoods are actually nothing more than walkway markers because all you really see are eerie glowing balls. There is not nearly enough light to create a safe walkway or highlight a step. Sadly, in my experience, solar spot or flood lights are pretty much an industry joke in every aspect.

Why is it that these products just don’t work?

In order for a solar reception panel to collect enough sunlight to power a lighting fixture it has to meet several important criteria: size and direction matter. Because the solar panel on these plastic light fixtures is so small, there is just no way for it to collect, convert and produce an adequate amount of energy to charge the battery which will then operate the LED illuminator with enough lumens to make a difference in the landscape. Then, if you place the fixture in a shady area, or clouds move over it - forget it.

You can get a pretty good idea of the complexities of solar energy production from this article here: http://en.wikipedia.org/wiki/Solar_power

After getting all of that off of my chest, I can say that there actually is a way to get great solar powered landscape lighting! I promise that I’m not losing my mind here – stay with me ….

One of the great things about LED landscape lighting is that it uses so much less energy than the old halogen lighting - about 75% less in fact. Therefore, we can operate a lighting system off of a solar collection system - and the collector does not have to be very large, depending on how much lighting is needed. As long as there is a place where a solar collection system can get plenty of sunshine, then there is no reason now that a solar outdoor lighting system can’t be created. To learn more than you probably need to know about these systems and how they work, you can check out this article: http://en.wikipedia.org/wiki/Solar_thermal_collector

Here in central Texas, we have a lot of ranches with really interesting rock entries, particularly down dark county roads, far away from the city lights. We recently had the opportunity to work with a ranch owner who posed this dilemma: They have a solar operated gate control, but people can’t see the gate area at night as they’re driving by. This is bad for guests and emergency responders. By installing a separate solar powered lighting system at his gate, we were not only able to make his ranch entry easy to find, it also shows off the cool rock gate structure with the added light enhancement! One more bonus -- it costs less than installing an electrical service, AND there’s no monthly usage fee!

Do you have an area that might be a good place for a solar lighting system?  We can evaluate the area and let you know if it’s possible and worth the money to go solar.  info@night-scenes.com

How Much is Too Much Lighting?

It sure would be nice if there were a simple answer for everyone.

When do you cross the line from not enough lighting to too much? When do you go from not bright enough to too bright? We could honestly spend days trying to answer these two questions, but the science of vision plays an important part, as does personal preference; but we’ll try to give you some good ideas here.

First of all, a little light goes a LONG way. The human eye adjusts to darkness relatively quickly, so we often discover that our clients appreciate a lower light level than they originally anticipated. Think about this for a moment: the moon is 238,900 miles from the earth. Although we talk about how bright the moon is, in truth it doesn’t actually produce any light, it simply reflects the light from the sun. A full moon here in central Texas is bright enough for us to move around at night pretty comfortably, too. So, a reflective light source from almost 239,000 miles away produces a lot of perceived light. Moonlight often provides a guide when seeking the proper lumens for safe illumination.

I rarely use anything brighter than a 50 watt equivalent light source in my designs; and that will illuminate very large (tall) oak and pecan trees. Lighting smaller plants or structures rarely requires more than the light output of a 10 or 20 watt halogen equivalent light source to do a very good job.

The primary purpose of any good lighting design is to accent the landscape (and architecture), not turn your home yard into Disney Land. Commercial properties may require more light because of other ambient light sources in the area, or for required minimal foot candle illumination of walkways, but residential projects generally do not need nearly as much light. If you live on a 50’X100’ lot and you have 100 lights, I’m pretty sure you have too much. However, the number of individual fixtures may not be as critical in assessing over-brightness as the lumen output of each. This combination must be considered in the design and will be dependent upon the objects, focal points, and safety concerns on the property.

If you get any complaints from a single neighbor about the brightness of your lighting, it could very well be a bit too much; or it may be improperly aimed or installed. If your lighting is shining onto your neighbor’s property, this is called “light trespass” and it needs to be adjusted. Step back and pretend to be your neighbor. If you think that you may have a little too much lighting, then you probably do.

Remember, less is more and it’s better to use lower lumen levels when designing an outdoor lighting system. Your eyes will adjust and your neighbors will happy.

NightScenes is a member of the International Dark Sky Association .  We believe that any property can be illuminated well and still help protect our night skies from light pollution.  We would love to help you asses your outdoor lighting needs in a responsible manner.  info@night-scenes.com

Price-Per-Fixture Quotes?

I still find it hard to believe, but there are some contractors out there who quote lighting projects on a “per fixture cost” basis. There have been lighting manufacturers who promoted this job cost technique to their prospective customers as an easy way to quote a lighting system and “make lots of money as an up-sale to your current business.” Honestly, who doesn’t want to find the easy way to make money today? And to have the quote be so easy to prepare would make the closing quick and painless, right? Not necessarily.

Most quotes using this system I have seen come in anywhere from $150 to $400 per fixture – a pretty wide variance. I’m often asked by home builders to give them a per fixture price. My answer to those builders (and homeowners) posing the price-per-fixture query is, and always will be, NO WAY. Although, in theory, this may seem to be a simple quote plan, the truth is: it’s just not that simple.

How in the world can the smart contractor give a per fixture price for a project without even figuring in things like getting wire under sidewalks, or here in Texas, through rocky terrain? Heck, with some of those builders, we haven’t even seen the property or plans, and they want an accurate cost proposal? A serious business person just can’t operate profitably under those conditions. Advance planning and anticipating the unanticipated problem expense should always be part of a proposal with integrity.

Unfortunately, a domino effect can occur when the contractor starts out with a per-fixture price quote and is then unprepared to handle the unexpected issue of terrain, structure, outlandish expectation or costly mistake. In many cases, trying to cut a corner somewhere else to make up the difference will be attempted. Maybe instead of using waterproof connectors they decide to go with regular wire nuts to save some money. This may not seem like a big deal, but it’s probably the most common cutback we see, and it creates the biggest problems in the future. This little mistake causes corrosion in the wiring, causing the infrastructure of the entire system to fail. Another cost cutting method could be reducing the transformer size – and, therefore, overloading it. It could be that contractor trying to recoup profit from an under-quoted job is to use a cheaper mechanical timer over the more reliable (but more expensive) digital timer. A mechanical timer causes a headache for the homeowner and the service provider because it loses time whenever the power goes out. These are just a few of the more common issues we’ve encountered; there are a lot of ways to cut costs to make up for unexpected expenses, none of them good for the homeowner.

There are far too many factors to consider when designing and installing a quality outdoor lighting system for the contractor to simply give a per-fixture price. Those who use the per-fixture price method are generally either over pricing to make up for anything they think they may run into; or underpricing and hoping all goes well. Those who overprice the system are pretty happy because they can make a lot of money off of the uneducated client, and those who underprice are rarely heard from again to repair the problems that will almost always result.

If you do not want a per fixture quote, but instead want a well-designed outdoor lighting system proposed and quoted honestly, please drop us an email and we’ll be happy to take a look at your property.  info@night-scenes.com .  As always, we welcome any comments you may have below.  Thank you.

LED Lamps In The Landscape

Americans are hearing more and more about LED lamps, and are becoming very excited about their benefits, I think. I now have people calling our company and actually requesting LED lighting since NightScenes is well known as the outdoor LED lighting specialist in central Texas.

We’re sure that other outdoor lighting companies in other parts of the world may have different experiences with certain LED products but this is what we have discovered in our part of the world, central Texas.

We have been installing LED outdoor lighting almost exclusively for over five years now, and have seen the good, the bad and the ugly when it comes to LED options. We’ve had great success with some products, and we’ve also had a few major failures where we’ve had to go back and replace several hundred LED lamps at no charge to our clients. The silver linings in these failure clouds, however, are the lessons learned about what to look for in a quality product.

Over the years, we have found that the best option for LED outdoor lighting is integrated fixtures when installing a new system from scratch. We have also discovered which LED integrated fixtures are most effective, and which ones to stay far away from.

It has taken a while for manufacturing companies to develop high quality LED lamps that can handle the harsh outdoor environment. There has been much progress recently making it possible to upgrade the thousands of existing outdoor lighting systems out there where the fixtures and infrastructure are still in great shape. These systems can now be easily converted to LED, in most cases with simple lamp replacements.

So, why spend so much money to convert a perfectly good halogen system to LED? There are several reasons, but the biggest reason is the constant cost of maintenance. It appears that halogen lamps are just not lasting as long as they once did. At one time, halogen lamps would last about 5000 hours, as long as they receive the proper voltage. We are finding now that even the very best lamps do not last anywhere near this long anymore. Generally, we feel pretty lucky to get 3000 hours out of a “quality” halogen lamp these days. This means that if a halogen landscape lighting system is operating from dusk to midnight every night, these lamps will only last about a year to year and a half. Consequently, we have to replace all of the lamps in a system every year to avoid multiple calls to the home as the lamps give out a few at a time over a shorter period of time. This is expensive in the cost of materials and labor; additionally, of course, there is the cost of energy use itself which is considerably greater in the halogen products.

Now let’s compare the LED lighting. Some LED lamps available are really BAD, and some are very GOOD; it is extremely important to know which is which. We have learned the hard way what to look for in a high quality product. Each lamp is manufactured with several electronic parts coming from many other manufacturers, and it’s these parts that make all the difference in the world when developing a quality finished product. The truly great LED lamp manufacturers use very high quality parts to create a lamp that will perform as advertised in the harsh outdoor environment. These products are not cheap to purchase, however; but are actually less expensive over time than the bargain priced merchandise because the good stuff will last as long as they say they will.

Industry professionals now have access to LED lamps that should last for 40,000 hours; even at that point, the lamp will still be producing 70% of the original output. This is the point where the lamp is considered no longer serviceable by professional lighting contractors. The result is a lamp that would not have to be replaced for up to 20 years, depending on how long it operates each night. This is where the big savings will come into play. The homeowner will not have to pay us (or anyone else) to come out and replace lamps every year. You also won’t be buying new lamps annually. No one will be spending hours on end trying to remove burned on hard water and calcium deposits from the light fixture lens since these LED lamps burn much cooler than halogen (which burn very HOT). This savings adds up to hundreds of dollars a year on some systems. There’s also an LED bonus: the operating energy cost savings of about 75% compared to halogen energy consumption. Although significant, the primary savings is still in maintenance and lamp replacement.

But this does not mean that these LED systems are completely maintenance free. It means that regular maintenance is easier and there should be no materials needed; therefore, will cost a lot less. As plants continue to grow, fixtures may need to be moved or adjusted, or the plants may need to be trimmed. Fixture lenses will still need to be cleaned; but as I said earlier, it’s much easier with LED fixtures since nothing bakes onto the lenses. Our experience is that maintenance labor time on an LED system is about 70% less.

One more thing to touch on is actual cost. Quality is not cheap, so please don’t fall for cheap LED products. You are simply not going to find good and cheap in the same package. You can get good or you can get cheap, and cheap usually costs a lot more in the long run. A quality LED product is going to cost more up front, but will pay for itself far better than the cheap product that you end up replacing far sooner and more often than you expected. Cheap rarely makes for a happy homeowner down the road.

Look to a reputable outdoor lighting company who installs high quality, well-reviewed products. These products should have long and easy warranties that do not require a lot of paperwork, or require the contractor or home owner to jump through hoops to get replacements. We always stress the importance of diligence in research before making such an important investment in your home.

We are here to help you when you need us.  info@night-scenes.com

It’s All About The Connections!

LET’S CONNECT!

No, I don’t mean on the latest social media site -- although that would be totally cool!

What I’m talking about today is making the important connections in an outdoor lighting system. Any outdoor lighting contractor, irrigator or landscaper could install the best quality lighting fixtures on the market today, but if they do a poor job of connecting the wiring, it’s a lighting system with a very short life span.

How can it be that a small, routine part of almost any electrical project can cause such catastrophic malfunction?

Think of the wiring in an outdoor lighting system as the arteries of your body. Your arteries carry the blood to every part of it, and if any of these arteries get blocked and blood can’t flow out from the heart, you know there will be a serious failure of some kind in the body. Now, the wiring for outdoor lighting is like the arteries in the system. The wires have to carry the electricity, like the blood, to every component in the system or something will fail to work.

The weakest points in this system are the connections. These connections, like the wires, are buried directly in the wet dirt. After all, even in a drought (like the one we have in central Texas right now), the landscape will be a wet environment – at least occasionally, as water is likely to be provided to plants and trees from time to time. In our experience in repairing and upgrading lighting systems, we have seen many causes for system breakdown: everything from wires simply twisted together and covered in electrical tape, to regular (not gel-filled) wire nuts with no covering.

Just think about that for a moment. Think back to your sixth grade science class - how well does electricity and water mix? What happens in the case of your lighting system here is that water seeps into the connection. At best, the wires corrode beyond help; and at worst, it causes a short circuit interrupting the flow of electricity causing a system, or partial system, FAILURE.

So, please – ask the question to make sure that the person you hire to design and install your outdoor lighting system uses a waterproof method of making their wire connections. If the wiring fails, we can’t just put in a stent to support the bad artery - you’ll need a complete by-pass for your outdoor lighting system. And that can be expensive surgery.

If you have a current lighting system that is not working properly, maybe we should have a look to see if the problem stems from the connections.  info@night-scenes.com .

Don’t Spend Too Much For Outdoor Lighting

I may upset some of my lighting colleagues out there but, here goes …

Whatever you do, do NOT spend more than you are comfortable with for your outdoor lighting system. There, I said it. And I feel better now, how about you?

I’ve said many times in this blog that you can expect to pay quite a bit for a quality outdoor lighting system, and I stick by that. Cheap is just that, cheap. You get what you pay for in this industry, and in most other things. So now that we know all of that, how much is too much?

Too much is more than you feel comfortable with. It’s really that simple.

Maybe you’re comfortable spending $5,000 on a nice outdoor lighting system, and if that’s the case, don’t let yourself be talked into spending more than that. That may not purchase very extensive system, but perhaps you’ll consider adding more at a later date. Maybe you spent $50,000 on landscaping and were only planning to spend about $7500 on lighting. There’s nothing wrong with that at all – so don’t be intimidated into busting your budget by an aggressive salesperson. A good lighting designer will give you everything they can for that budget number. Once again, you may want to add onto it a year later.

What I hear more than anything from prospective clients is that they really have no idea of what a good outdoor lighting system should cost. My standard answer is “probably more than you think.” It’s always advisable to have a budget in mind, however; that way the designer can let you know from the start if your number is just unreasonable, or what to expect for your budget amount. The contractor might let you know that your budget is only enough to get started, and that you may not be entirely happy when it’s done. I have been known to suggest to a prospective client that he delay their project for a little longer, freeing up a little more budget room, so they’ll be happier when the project is finished instead of suffering disappointment when we are unable to fulfill their vision.

I try always to assure my clients that I can work with any budget that is within reason. There are always options when working within a budget. One of the most popular is to consider completing the project in phases. This way the client can be pleased at the end of each phase, and knows there is something more to look forward to, without having buyer’s remorse because they simply outspent the budget. If any contractor - in any field - tries to strong-arm you into spending more money than you are comfortable with, you should simply not do business with that person EVER.

We love to work within our client’s budget so let us know if we can create a little or a lot of outdoor magic for you.  info@night-scenes.com

Top 10 Reasons To Go With A Pro For Holiday Lighting Instead Of Wal-Mart

Yup, although it’s 90 degrees outside right now in central Texas, we are gearing up for the holiday season here at NightScenes. I know what you’re thinking - and I was also one of those people who used to say “I can’t believe they’re putting out Christmas stuff and it’s not even Halloween!” But since I started offering holiday lighting service about 7 years ago, it seems that I never get started soon enough.

So, what can a company that designs, provides, installs, removes and stores your holiday lighting do for you that your local Wal-Mart, Home Depot, Lowes, and the others can’t do? Well, we can custom design, provide the materials, install, remove and store your stuff! In a nut shell, anyway.

Here’s the Top 10 Reasons You Should Hire a Holiday Lighting Professional:

10. The lighting is custom cut to fit your home. No limp swagging light strands from one section of roofline to the next. Straight lines and no electrical tape or magic markers needed black out lights you want blocked. In other words, a much neater, cleaner installation. Nobody’s mother-in-law will be complaining about crooked installation!

9. In most cases your entire custom designed holiday lighting display can be controlled by ONE switch inside your home! No circling your home plugging in or unplugging the many extension cords every night.

8. No overloaded circuits. A good outdoor lighting company will figure out the load of the lighting ahead of time to insure that they don’t overload the electrical circuit, trip the breaker and leave yours the only dark house in the neighborhood. (You’ve never overloaded a circuit, right?)

7. No agonizing searches for the right color replacement for those burned out light bulbs. We take the time to find and replace any and all burned out lights before the installation; and we can even come back out during the season to replace any that go out so yours can always be the star home on your street. (There may be a service call for this after the first year.)

6. Did we say CUSTOM? You can pick whatever colors you like. Some people like the classic warm white lights, while others like to mix it up with the multi-color option. Some clients like the candy cane look of white and red. Others may like to show their team spirit by using their school colors (orange and white, anyone?). The great thing is that we are only limited by your imagination and the extensive color selection of the manufacturer.

5. Want to spend more time shopping for the perfect gifts, playing with the kids and grandkids, attending the circuit of holiday festivities and more fun activities? Hiring a professional means you stay in complete control of your schedule and don’t have to take time away from your social life to put up the Christmas lights!

4. No headaches from tangled light strands to deal with - ever! Yup, we got this!

3. Professional grade lighting products last for several years, sometimes longer if the weather is mild. It seems that the stuff you get at the big box stores is a bit flimsy and has to be replaced every year. The equipment we use lasts from season to season because we are helping you take care of it! So far we have only had a couple of defective lighting pieces that have had to be replaced out of the thousands that we have installed.

2. Don’t worry, be happy! We take care of everything! The pros are great at relieving your holiday stress by giving you a few less things to think about. The decorations go up, they come down, and they disappear until next year and you don’t have to worry about any of it. We even send out reminders for the next season!

And the number one reason to hire a professional lighting company for your holiday lighting -- drum roll, please --

1. Have you ever fallen off of a ladder? No need to worry about that, our team can fall off of the ladder for you!

Separate your home from the pack in your neighborhood and free yourself from a little holiday stress. Traditional or over-the top – and anywhere in between, we can be your go-to holiday lighting experts. Wouldn’t you like NightScenes to make this season go a little smoother?  Drop us an email at info@night-scenes.com and we wish you a very MERRY CHRISTMAS season!

LED Lighting is so UGLY!?

“I hate that cold, ugly blue looking LED lighting!”

I hear that pretty often, and can’t agree more. Most people still think of LED lighting as that cheap Christmasy looking light: blue-ish and without warmth no matter what the application, and that was very much the truth in the not-so-distant past. But LED lighting has come a long way recently, and there are many more options available that can quickly dispel that ugly notion. Still, cut-rate LED lighting is indeed almost always UGLY.

We actually conducted a test for one skeptical client. We placed two LED products in their landscape along with their other halogen lighting and did not tell them where we put them. We left them there for three whole months, and they could not tell where these lights were! They were quite surprised when we informed them that one of the lights was illuminating their front door entry, and the other was shining on their white garage wall, right next to a halogen fixture. Needless to say, we ended up converting their whole system to LED.

There is no doubt that light color has a significant effect on mood and ambience, and many articles have been written and studies performed linking color with emotion. In the outdoor setting, typically, the preference always leans toward the positive effects of warmer, more amber toned illumination over the cooler blue-green hues than cast an unfriendly appearance primarily on skin tone. To site a couple of these articles: http://www.randallwhitehead.com/news/emotion_light.php

or

http://psychology.about.com/od/sensationandperception/a/colorpsych.htm .

In the landscape lighting industry we now have several options for lighting color as some high quality LED lighting manufacturers have finally perfected their products. At last, we have LED products with the same color as the warm and welcoming halogen lighting we all love. Also available are LED products in the same color as natural moon light, which can look stunning in the landscape when done well. A warmer color light can really make darker colors look wonderfully inviting, while a cooler color light can make blues and whites really pop in the landscape. An experienced outdoor lighting designer knows how to use light color to add interest and depth to the project, bringing out the best in the landscape and architecture.

Lighting color is measured in Kelvin units referring to temperature. In most outdoor lighting applications, we use the warm 2700-3000K color of halogen in our designs. But the best LED products that produce this color CONSISTANTLY are not cheap. Please notice the word consistently. I make a special point of this because there can be a wide range of light color coming out of the same factory if they don’t adhere to very strict standards. The process of “binning” to produce the desired and consistent color outcome will be covered in another post.

Please leave your comments or questions and we’ll be very happy to respond.  Or, drop us an email 

How Many Landscape Lights Do I Need?

This is one of the most frequently asked questions we hear. To help answer this question, we need to ask why the homeowner wants landscape lighting in the first place. The number of lights will be determined by the client’s answer to our question. Each project is as unique as each homeowner, and there is wide range of very subjective answers.

For example:

§ You just want to light the walkway from the driveway to the front door? The distance is only 25’? The answer is 3 pathway lighting fixtures. BOOM DONE! Right? Not exactly. You forgot to tell me that you have a 50’ tall live oak tree right there next to the walkway. In that case, 1 down light fixture installed about 25’ high, with a 60 degree beam should do the trick. BOOM DONE! Right? Not necessarily. There are always more possibilities.

§ You love to spend time in your back yard, and even entertain every now and then; so you want it to look pretty and have enough light for your guests to move around. Now we’re looking at task lighting, as well as ambience lighting. Do you have exterior lights on your house (and I’m not talking about those awful flood lights on the corner of your eves either)? Depending on the exterior lights, you may not need much for task lighting, and need more “pretty” lighting. Again, lots of possibilities.

So, what is the simple answer? Well, honestly, it all depends. (Isn’t that what everyone says?) It’s true, every home is different and every yard is different. Every client has a different view of their own home, and what they want as well. Knowing why the homeowner wants lighting is as critical as any other design tool. Lighting designers can look at the fixture or lamp photometric charts to determine the beam spread and light output of the fixture to help determine the proper fixture and placement to take care of the job. This means that the designer needs to do a site visit and take some measurements to insure they specify the proper fixture and or lamp for each application. But we still need to identify what the application is serving.

The size and shape of plants and flower beds will also be a factor in counting the number of fixtures needed. Personally, I tend to use more fixtures in my designs because I like to create focal points, and use layers of light to bring out the very best in each property. But also, more light isn’t always the right answer for every property, either.

Photo above is a path/spread fixture from Kichler Lighting

So here’s the answer: It will either be a few or a lot, and I usually use more than a few but less than too many. I have projects featuring one or two carefully placed lights, and I have projects with over 200 fixtures on one acre of land. As long as the homeowner’s desires are fulfilled, and they are happy with the project, we consider it a success.

Of course, that 200+ fixture project has been featured on more than one magazine cover because it looks REALLY good.  The average home will require somewhere between 25-50 fixtures.

We’re ready to take a look at your property to see how many fixtures you need.  info@night-scenes.com

Does LED Lighting Attract Bugs?

Have you heard that LED lighting does not attract bugs?

I had indeed heard this, and boy was I surprised! Especially since I have LED lighting all around my home and I still have some bugs! One person came very close to calling me a liar until I explained what I do for a living, that I’ve been installing outdoor LED lighting exclusively for over five years now, and I have the spider webs at my house to prove it. My disclaimer, however, is that my home is my “test facility” and I have a LOT of lights in my yard from the most reputable manufacturers.

But now that we know that LED lighting is not a new bug repellent, let’s take little deeper look at this issue. Bugs are attracted to a lot of things: UV and infrared are just a couple of those things. LED does not emit UV or infrared, but since LED does emit light, it will still attracts bugs - just not as many.  You will see this even more when comparing LED lights with different color light output.  Cooler color light will attract more bugs than warmer color light.  This means that if you use LED lights that are comparable to halogen light color you will see less bugs than if you use the whiter moon light color of LED.

You generally won’t see big moths flying near the LED light fixtures, but you are likely to see some very small bugs buzzing around. You’ll find that some small spiders will notice these bugs as well, and try to catch those little “buggers.”  Once again, you will not see this nearly as much as you do with halogen or incandescent lighting.

In summary, when you hear the claim that LED lighting does not attract bugs, please don’t buy it. I would say that the LED lights attract about 90% less bugs than the other options. While LED sure doesn’t attract anywhere near as many bugs as other outdoor lighting options, it remains a light source that some bugs will still find mighty attractive.

Of course, we always welcome comments and questions below or drop us a line at info@night-scenes.com with your outdoor lighting questions.  You can also visit our website at www.night-scenes.com

Ultimate Landscape Lighting Design Options

One thing I have always said is that there are never too many options when it comes to great outdoor lighting design.  A great design requires at least three different light levels and at least a couple of different beam spreads.  It also requires proper placement of the fixtures.

My friends at CAST lighting sent me a sample of their Impressionist Series of fixtures to take for a test drive and I must say that I am duly impressed.  Here is a short video from CAST that explains what this product can do.

CAST lighting produces a very high quality product that we are proud to use in some of our projects.

In the hands of a qualified outdoor lighting designer, by being able to set each fixture to a different light output level and also change its beam spread, we can create the ultimate outdoor lighting system for a home or business.

Does this sound like a lighting system that you would want for your property?  Drop us a note and we’ll schedule an appointment with you.  info@night-scenes.com

We may NOT be YOUR outdoor lighting company

More than anything else, we want everyone to be happy with their outdoor lighting. That means they have to be pleased with the experience of the initial consult, the design, the installation, the service after the sale and the price. If someone is not happy with any part of that relationship, they are not happy with their outdoor lighting system.

This is why we don’t charge a penny for our initial consult. We want folks to get to know us a little, and we want to get to know them as well. People who don’t like each other, probably aren’t going to have a smooth working relationship, and probably won’t be happy, right? So, if we walk around together to discuss lighting ideas at your home and you’re not comfortable with any part of that visit, we’re probably not the right outdoor lighting company for you.

But if we seem to be getting along great and we like each other’s ideas for lighting your outdoor spaces, and agree on the basic concept, then we’re ready to get going! Until I bring up the design fee -- and there’s a screeching sound as the brakes are slammed on. “What do you mean, design fee?” Yup, a design fee. Can you imagine what a home builder would say if you asked him to build you a without any plans? Not only are there no plans -- but you’re not willing to pay anyone to create some plans. Can you see the builder scratching his head? Perhaps some builders will offer a design service to create the perfect custom home, but they will charge for that service. Can you imagine going to a landscape design company and asking them to create a design for your home, but you don’t want to actually pay for that design? That probably wouldn’t go over very well, either. NightScenes is an outdoor lighting design company. Yes, we do also install, maintain and repair outdoor lighting systems; but design is the benchmark of our lighting service. Our designer has spent many hours, days and weeks learning and honing his craft to become skillful and artistic in outdoor lighting design; therefore, he needs to be compensated for the knowledge he brings to the table. There are some outdoor lighting companies out there that offer a free design, demo or quote. If you would feel better about it, and be happier with a free quote, then we’re probably not your outdoor lighting company.

When it comes to the installation, there is the right way to do it and there are the other (wrong) ways to do it. We only do it the right way. We are members of the Association of Outdoor Lighting Professionals which promotes a very high standard for our industry. They require their members to follow specific and comprehensive criteria to insure safe and code compliant installations, and this is provided to each member in writing. This model is the right way of doing things when it comes to an outdoor lighting installation. Anything less is simply the wrong way. There are plenty of lighting installers out there who will cut some corners, use some inferior products and staple wires to trees because it’s faster and cheaper than doing it the right way. If you’re in the market for someone who will do a quick and dirty installation for you, we’re probably not your outdoor lighting company.

Finally, there is the service after the sale. As far as I know, we are the only company in Texas, and maybe anywhere in the country, which includes three full years of service after the installation on residential lighting systems that are designed and installed by us. I’m pretty sure that most reputable companies would offer at least a year of service -- or I would hope so, anyway. You may stumble on those that don’t provide any service after the sale. If you are a DIY person and don’t need service once the installation is done, then you probably will not need to be your outdoor lighting company.

My hope today is that we’ve been able to help you determine if we might be a good fit for you and your outdoor lighting needs. If we do, in fact, sound like your kind of outdoor lighting company, please drop us a note at info@night-scenes.com and request an initial consult for an outdoor lighting system. We are looking forward to meeting you!